Xuron® 2193F Memory Wire Cutters with Retainer Mold & Model Making with a minimum weight of

with a minimum weight of 0

This brass plunger is marked with witness lines to help indicate its movement as you press it downward into the reduction die (available separately)

This oval 14/20 yellow gold-filled double-clad quality tag (sometimes called a design or jewelry tag) is stamped with "1/20 14K" and has a hole at each end

7mm diamond-cut hexagonal beads evenly spaced along its length

in black linen

Xuron® 2193F Memory Wire Cutters with Retainer Mold & Model Making with a minimum weight ofThese Xuron cutters are specifically designed to cut memory wire, which would damage the jaws of most cutters; these cutters can also handle piano wire or any hard wire up to 0. 064" (14 ga.) thick. Cutters designed for memory wire have exceptionally strong jaws and help eliminate pinched ends, leaving ends square and usable on both sides of the cut. The retainer on the upper jaw catches and holds the cut piece of wire to keep it from flying off, and